Archives

All posts for the month November, 2013

Share Button

0X4A2582A customer came in this week and wanted to upgrade a 2014 Jeep for his son but wasn’t sure of what to get. Once he saw a few AEV products, he knew right away what he wanted to do. This is the end result.

 

 

 

Tried and true, the AEV premium bumper is no stranger around these parts.
AEV and WARN up front. These two really go hand in hand.
The winch fits so well!
A closer look at how snug the WARN 9.5 cti-S fits. Like a glove!
Mostly stock, this is still a good looking JK. Can't wait till the owner brings it back for us to finish!
AEV rear bumper with rear tire carrier.
Nice clean lines.
Even though this was a small build, it's still a head turner.

 

Parts List
AEV – Hawse Fairlead License Plate Mounting Plate
AEV – JK Rear Tire Carrier
AEV – Splash Guards
AEV – Front Bumper Tubeless
AEV – JK Winch Mount
AEV – Rear Bumper with Tire Carrier
WARN – 9.5cti Winch with synthetic Rope

Share Button
Share Button

copper09A customer brought his beautifully colored 2014 in wanting to add some Northridge flare to his daily driver. As a result, we installed a few products from AEV, Method Race Wheels, Nitto, Teraflex, and Tuffy. Now this JK is ready for the weekend wheeling while keeping the day to day rides nice and smooth.

 

 

Brand new, off the lot 2014 JK in a great copper color.
A closer look at the AEV bumper.
Nitto Trail Grapplers on Method Double Standards.
Nitto Trail Grapplers and Method Race Wheels Double Standards make a killer combination.
AEV 2.5in lift allows for more clearance while keeping the daily driving smooth like butta!
When running aftermarket wheels or larger tires it is necessary to extend the mounting point of the wheel from the vehicle. It also helps to raise the spare tire to allow for clearance between the bottom of the tire and the rear bumper. The Teraflex Spare Tire Extension Bracket does both.
Here's a side view of the Teraflex Spare Tire Extension Bracket. You can see how much clearance you have here.
Another look at the AEV Premium front bumper.
Such a great color!
All in all, this JK turned out great and the customer was very excited.

Parts List

AEV – DualSport XT Suspension – 2.5 Inch
AEV – Geometry Correction Front Control Arm Brackets
AEV – ProCal Module
AEV – Premium Front Bumper
AEV – Winch Mount
AEV – Non-Winch Cover Plate Gen II
Method Race Wheels – Double Standard, 17 X 8.5, 0mm Offset, 5 X 5, Matte Black 304
Nitto – Trail Grappler 35/12.50R17
Teraflex – Spare Tire Extension Bracket
Tuffy – Flip-Up License Plate Holder

Share Button
Share Button

0X4A2958

As a special build for Premier Performance’s SEMA booth, we wanted to build the best JK that people would actually want to wheel. There were a ton of Jeeps at the show, but we strongly feel that our build was the most functional and appealing to all jeepers. By far, this is one of our favorite builds we have ever done.

 

 

By far, this is our favorite build!
WARN winch and the new Factor 55 FlatLink compliment the Poison Spyder Brawler Lite bumper very well.
Truck-Lite LED headlights are simply a must have upgrade.
40in Nitto Trail Grapplers on Trail Ready beadlocks.
A Poison Spyder Rock Brawler II rear bumper and Rigid SR-Q2s bring in the rear.
Here's a closer look at the Rigid SR-Q2.
Attention to detail is apparent here on the Poison Spyder bumper.
Dynatrac ProRock 80 rear axle. This thing is indestructable!
An ARB freezer fridge is one investment you won't regret.
Especially if you get the slider too! It really makes a difference.
An sPOD is another must have upgrade on any Jeep build.
A closer look at the Factor 55 FlatLink shows off how it got its name.
The one and only Colin from Active Grafix installed this custom wrap for us. It's really a head turner.
A top shot gives us a better look at the hood graphics.
A closer look at the AEV heat reduction hood and the hood graphics.
EVO double throw down!
Is this a must have? No but it's a really great upgrade!
Currie AntiRock Front Sway Bar Kit w/ Steel Frame Brackets.

Parts List

Active Grafix – Custom Jeep JK Wrap
AEV – Heat Reduction Hood w/ Black Mesh
AEV – Procal Module
AEV – Rear Corner Guards
AEV – Front Floor Liners
AEV – Rear Floor Liners
AFE – Magnum FORCE Stage 2, Cold Air Intake System
ARB – Air Lockers
ARB – On-Board High Performance 12 Volt Twin Air Compressor w/ Manifold
ARB – Fridge Freezer – 50QT
ARB – Fridge Freezer Slider
Coast – 1350/1350 Front Drive Shaft
Coast – 1410/1350 Rear Drive Shaft
Currie –  AntiRock Rear Sway Bar Kit
Currie –  AntiRock Front Sway Bar Kit w/ Steel Frame Brackets
Dynatrac – ProRock 60 Dana Front Axle
Dynatrac – ProRock 80 Dana Rear Axle
EVO – Front Double ThrowDown System
EVO – Rear Double ThrowDown EVOLeaver System
EVO – Long Arm Upgrade Kit
Factor55 – New FlatLink Shackle Mount
J.W. Speaker – 4 Inch Round LED Fog Lights
King Shocks – Front 2.0” Remote Reservoir Coilovers
King Shocks – 2.5” Triple Bypass Shocks
King Shocks – Rear 2.0” Remote Reservoir Coilovers
King Shocks – 2.0” Double Bypass Shocks
Magnaflow – Performance “Off Road Pro Series” Exhaust
Mopar – Jeep JK 2012-14, Flat Black Jeep Front Grille Emblem, Nameplate, Decal
Motive Gear – 5.13 Ring & Pinion
Motive Gear – Master Bearing Overhaul Kit
Nitto – Trail Grappler 40/13.50R17
Poison Spyder – Brawler Lite Front Bumper With Brawler Bar
Poison Spyder – Rock Brawler II w/Tire Carrier Rear Bumper
Poison Spyder – Brawler Rockers
Poison Spyder – Extreme Duty Trans-Mount Crossmember
PSC – High Volume Steering Cylinder Assist Kit
RCV – Ultimate 300M Dana 60 Front CV Axle Set
Rigid – New E2-Series 50” LED Bar with Drive/Hyperspot Optics
Rigid – 6 A-Series Rock Lights
Rigid – 2 SR-Q2 Diffused Back Up Lights
Rigid – Tail Light Bracket SRM – Driver Side
Rigid – Tail Light Bracket SRM – Passenger Side
Rock Hard – Transfer Case Skid Plate
sPOD – 6 Switch, Double Light Contura Rocker Switches & Source System
sPOD – Remote Control Power Module
Trail Ready – 17×9 8 on 6.5 Beadlocks
Truck-Lite – 7’’ Round LED Headlamp, Complex Reflector Optics Design
WARN – 9.5cti-S Winch w/ Spydura Synthetic Rope

 

 

Share Button
Share Button

2014 Red JK

Coming out of our Colorado shop, this 2014 JK stopped by for a few upgrades. Equipped with products from AEV, ARB, ATX, Dynatrac, EVO, Fox Racing, Nemesis, Poison Spyder, and WARN, this machine is ready to tackle off road wheeling.

 

 

 

Fresh off the lot, this 2014 got some Northridge lovin.
What JK would be complete without the limited edition badge?
We're really digging this color!
Fox steering stabilizer, Synergy MFG drag link and a Dynatrac ProRock 44.
Poison Spyder Rock Brawler rear bumper and ProRock 60 rear axle.
Poison Spyder Brawler Rockers look great between the Nemesis front and rear flares.
EVO front bumper and Nemesis front flares.

Parts List

AEV – DualSport RS Suspension – 3.5 Inch
ARB – On-Board High Performance 12 Volt Twin Air Compressor
ATX – Slab Beadlocks
Dynatrac – Trail-Series/ProRock 60 Rear Axle
Dynatrac – ProRock 44 Unlimited Special Package
EVO – Front Bumper
Fox Racing – Steering Stabilizer
Nemesis – Notorious Front Flares 2/4 Door, Aluminum
Nemesis – Notorious Rear Flares, 4 Door, Aluminum
Poison Spyder – 4-Dr Brawler Rockers
Poison Spyder – RockBrawler Rear Bumper
Synergy MFG – High Steer Drag Link
WARN – 9.5cti winch

 

 

Share Button